General Motors LS Plugin johtosarja

Nopein, helpoin, siistein ja kustannustehokkain tapa liittää Link ECU sinun Drive-by-Wire/sähkökaasulla varustettuun  LS V8-moottoriin, on käyttää valmis mallikohtainen johtosarja ja  G4X XtremeX ECU:

• Moottorin johtosarja GM LS GEN3/4*
• LS DBW -johtosarja

*Huomiot Gen4 koneen käyttäjille:

• A cam sensor harness extension will be needed to accommodate the Gen 4 LS front mounted cam sensor.     
• A small modification is required to the crank sensor connector. See “crank connector” section in installation manual for details.     
• Injector Connector Adapters to USCar connector will be required for most Gen 4 Engines. Check your injector connector to confirm. Use Link PN 101-0287     
• To support Gen 4 factory knock sensors you will require the Link LS Gen 4 Knock Adapter Loom (PN 101-0306)    
• To support the factory Gen 4 MAP sensor you will require a Link LS Map Adapter Loom plus a Gen 3 to Gen 4 MAP sensor extension harness (alternatively you can use a Link MAP sensor which is directly supported by the harness)

PCLink peruskartat:
Gen3 DBW Base Map for G4X XtremeX/StormX

Gen4 DBW Base Map for G4X XtremeX/StormX

Harness Manual

Online Instruction Manual